Vpad to VP100 or VP 200 - how to's ???

Don't know why they keep move it around a lot and not my problem. Wireless is solve the problem for move around.


What about DDD for ethernet cable?
 
Vp-200

If youi guys are getting a black screen on VP-200, please follow the instructions:

1) Make sure your private IP address on VP-200 matches via DMZ or Port Forward (it depends on the router's setting, so try both).

2) I am not sure if I have the liberty to disclose the port number, if you know it, share it. I'll ask my boss.

3) As for DMZ, the standardized IP address is 192.168.0.125 (just follow the gateway IP address format and just end the last octet with .125). If it's already presented via VP-200 then make sure your router is set to DMZ with the private IP address I mentioned above. When you're done, reboot your VP-200.

That should remedy your problem. I am an IT specialist, graduated from RIT with a BS degree in Networking and Web Developer. If you have any questions associated with your VP-200, PIM me and see what I can do on my end.

Hopefully I'll find a better job working for the government.. gonna work on that later; I am really happy working for Sorenson but the taxes are really biting on my bottom! Oh well, tax refund is just around the corner :-p

Well... :)
 
misdirectionx said:
If youi guys are getting a black screen on VP-200, please follow the instructions:

1) Make sure your private IP address on VP-200 matches via DMZ or Port Forward (it depends on the router's setting, so try both).

2) I am not sure if I have the liberty to disclose the port number, if you know it, share it. I'll ask my boss.

3) As for DMZ, the standardized IP address is 192.168.0.125 (just follow the gateway IP address format and just end the last octet with .125). If it's already presented via VP-200 then make sure your router is set to DMZ with the private IP address I mentioned above. When you're done, reboot your VP-200.

That should remedy your problem. I am an IT specialist, graduated from RIT with a BS degree in Networking and Web Developer. If you have any questions associated with your VP-200, PIM me and see what I can do on my end.

Hopefully I'll find a better job working for the government.. gonna work on that later; I am really happy working for Sorenson but the taxes are really biting on my bottom! Oh well, tax refund is just around the corner :-p

Well... :)
Click to expand...

There's no reason for DMZ anymore...
 
I would agree with Nathan. If there is more than 2 VP then yoman would have to add port forwarding. No, DMZ isn't really necessary to be turned on. If the DMZ is turned on with a lot of port forwarding, it would directly to the default VP. I know qwerty would scream, "MUST HAVE DMZ ON!!!" Anyhow, like I said, DMZ isn't necessary anymore since port forwarding works for all VP now.
 
DMZ is once be too easy to setup in past but today isn't that solution to DMZ anymore. It just need set port forward; however, UPnP should resolve several device on own who clueless setting the network or firewall/application rules.
 
qwerty123 said:
me says this many many times before no one support believe me now ddd say same thing

mvp vpad h323 suck over wifi soresnon codec best
Click to expand...

Believe it or not... I just happen notice Sorenson can handle the H. 264 for other device which its good news.

VPAD+ works well than MVP enable quality with videophone.
 
Back
Top